DPCAV
DELUXE A/V CABLE FOR TX9-500 / TX13-300 / TX13-1000 TRANSMITTERS, PRO-SERIES
| Orange | Audio input, connects to microphone or OSD |
| Red | +12VDC (from DC-IN) to power 12V microphone |
| Brown | Common Ground |
| White | Video from camera or OSD |
| Red | +12VDC (from DC-IN) to power 12V camera |
| Black | Common Ground |
| Red | +12VDC, to battery |
| Black | Common Ground, to battery |
Referring to the photo below, a summary of each connector is as follows:, , Polarity Guard:, Special circuit protects the video transmitter from reverse battery voltage., Video Tx:, This 4-pin cable plugs into the TX9-500, TX13-300, or TX13-1000 video transmitter., Audio-In:, Male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Female style servo cable, goes to video camera or OSD Video-Out port. EagleTree OSD applications will also need the, DC-IN:, JST (BEC) style female cable. Goes to the 12VDC battery that powers the video transmitter and camera.,
Upgrade your transmitter's bulky RCA cables with this custom wire ...DPCAV
900MHZ A/V RECEIVER, DELUXE MODEL WITH COMTECH TUNER
| Four (4) RF channels | 910MHz, 980MHz, 1010MHz, 1040MHz. |
| Instruction Manual | Click Me! |
The receiver requires a common 2.1mm barrel type DC power cord (available separately). It's not included so that you can choose what is best for your installation. We offer several different types and they can be found here:click here, The receiver requires a common 2.1mm barrel type DC power cord (available separately). We offer several different types and they can be found here:click here, half-wave dipole is a popular antenna choice and can be purchased with the receiver as an option. We offer other 900Mhz antennas too:click here., Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver!,
Our deluxe 900MHz wireless A/V (audio/video) receiver is compatible with ...DPCAV
900MHZ A/V RECEIVER WITH COMTECH TUNER
| Four (4) RF channels | 910MHz, 980MHz, 1010MHz, 1040MHz. |
| Instruction Manual | Click Me! |
The receiver requires a common 2.1mm barrel type DC power cord (available separately). We offer several different types and they can be found here:click here, half-wave dipole is a popular antenna choice and can be purchased with the receiver as an option. We offer other 900Mhz antennas too:click here., Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver.,
This 900MHz wireless A/V (audio/video) receiver is compatible with our ...DPCAV
900MHZ A/V RECEIVER, STANDARD MINI-MODEL
| Of course we offer other 900Mhz antennas, so please have a look | click here. |
| Four (4) RF channels | 910MHz, 980MHz, 1010MHz, 1040MHz. |
| Instruction Manual | Click Me! |
The receiver requires a common 2.1mm barrel type DC power cord (available separately). It's not included so that you can choose what is best for your installation. We offer several different types and they can be found here:click here, Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver.,
Our standard 900MHz wireless A/V (audio/video) receiver is compatible with ...DPCAV
900MHZ A/V TRANSMITTER, 1000MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
Non-USA model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver., Notice: Due to its high RF power, using the TX9-1000 in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., We offer 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here,
This 900MHz / 1 Watt (1000mW) wireless A/V transmitter is ...DPCAV
900MHZ PRO-SERIES A/V TRANSMITTER, 500MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
| Help! What else do I need? | Click Me! |
| 900MHz EMI/RFI Information | Click Me! |
For convenient installation, the TX905-PRO has a JST female power cable (compatible with several of our 3-cell LiPO batteries) and servo-style connectors on the camera and microphone cables. We've made it as ready to use as we could. Just add your compatible camera, battery, and A/V receiver (not included). Plus, a variety of optional accessories are available to make your installation as simple as possible:Click Me!, We also offer high quality 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here, Non-USA (export) model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Notice: Due to its high RF power, using the TX905-PRO in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.,
We've raised the bar again! This 900MHz wireless video transmitter ...DPCAV
900MHZ A/V TRANSMITTER, 500MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
Non-USA model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Important note: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver., Notice: Due to its high RF power, using the TX9-500 in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., We offer 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here,
Don't let the small size of this 900MHz wireless A/V ...DPCAV
1.3GHZ A/V TRANSMITTER, 300MW
| USA model has one RF channel | 1280MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
Non-USA model has four RF channels:, 1240MHz, 1280MHz, 1320MHz, 1360MHz, Important notes: The DC input connector is a 2.1mm barrel style connector that is center (+) positive. Reversed voltages will damage the receiver. NEVER operate the transmitter without an antenna or it may be damaged and warranty voided. Please see the instruction manual for more information., Notice: Due to its high RF power, using the TX13-300 in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., We offer a 1.3GHz A/V receiver that works great with this transmitter. So if you don't already have a compatible receiver then be sure to check it out:click here,
Don't let the small size of this 1.3GHz wireless A/V ...DPCAV
CUSTOMIZED A/V CABLE FOR LAWMATE A/V TRANSMITTER, PRO-SERIES
| Orange | Audio input, connects to microphone or OSD |
| Red | +12VDC (from DC-IN) to power 12V microphone |
| Brown | Common Ground |
| White | Video from camera or OSD |
| Red | +12VDC (from DC-IN) to power 12V camera |
| Black | Common Ground |
| Red | +12VDC, to battery |
| Black | Common Ground, to battery |
camera cables. It is also the ideal A/V cable for use with an OSD telemetry system. Note: connecting its video connector to the EagleTree OSD-PRO system will require a male-male adapter cable, item, Referring to the photo at the bottom of the page, a summary of each connector is as follows:, , Tx:, This 4-pin connector plugs into the TM-121800 video transmitter. It includes a special polarity guard circuit that protects the transmitter from reverse battery voltage., Audio-In:, Male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Female style servo cable, goes to video camera or OSD Video-Out port. EagleTree OSD applications will also need the, 12V:, JST (BEC) style female cable. Goes to the 12VDC battery that powers the video transmitter and camera.,
Upgrade your transmitter's bulky RCA cables with our Pro-Series wire ...DPCAV
CUSTOMIZED A/V CABLE FOR TX-5G8-600 TRANSMITTER, PRO SERIES
| Red | To battery |
| Black | To battery |
| Orange | Audio input, connects to microphone or OSD Audio-Out |
| Red | Voltage from DC-IN is sent here to power an optional microphone (available separately) |
| Brown | Common Ground |
| White | Video from camera or OSD |
| Red | The voltage from DC-IN is sent here to power the camera |
| Black | Common Ground |
Referring to the photo below, a summary of each connector is as follows:, , DC-IN:, JST (BEC) style female connector. Goes to the battery that powers the video transmitter and camera. The TX-5G8-600 transmitter will accept 7-25VDC, but the battery voltage you choose must be compatible with the video camera., Audio:, Male style servo cable, goes to optional microphone or OSD Audio-out port., Video-In:, Female style servo cable, goes to video camera or OSD Video-Out port. EagleTree OSD applications will also need the,
Upgrade your ImmersionRC TX-5G8-600 transmitter cable with this custom wire ...DPCAV
AIRWAVE AWM633TX A/V TRANSMITTER MODULE, 2.4GHZ/450MW
| Data Sheet | Click Me! |
Airwave AWM633TX RF Transmitter Module:, 2.4GHz 450mW RF transmitter module in surface mountable package. Simultaneously transmits high bandwidth composite video and, audio signals. Supports NTSC/PAL formats. Note: Due to its high RF output power, an Amateur Radio (ham) license may be required to operate this transmitter in your country.,
DISCONTINUED , NO LONGER AVAILABLE. stereo Features High quality video ...DPCAV
AIRWAVE 5.8GHZ A/V TRANSMITTER WITH PATCH ANTENNA, 100MW
Notice:, Due to its high RF power, using the AWV698-TX in the USA and other,
Special Purchase, Limited Supply! This fully assembled 5.8GHz 100mW A/V ...DPCAV
WIRELESS VIDEO TRANSMITTER & OSD, FPV DEAL
| Item A | EagleTree eLogger V4 with 100 Amp sensor. |
| Item B | USB cable for eLogger firmware updates. |
| Item C | Eagle Tree OSD Pro Video Expander module. |
| Item D | GPS extension cable for kits shipped before June-2010. |
| Item E | eLogger GPS-V4 Expander module. |
| Item F | Eagle Tree OSD Pro cable Kit. |
| Item H | DPC-420A 420 line CCD color camera. |
| Item I | DPC-420A/480A camera interconnect cable. |
| Item J | TX9-500 900MHz / 500mW transmitter. |
| Item K | Dipole Antenna, +3dBi omni-directional. |
| Item L | Deluxe A/V cable for TX9-500 transmitter. |
| Item M | Male-male video adapter cable, |
This wireless OSD system will transmit graphic data and voice announcements that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand this system even further by using the low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Notice: Due to the 900MHz transmitter's high RF power, using it in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements of your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., . We have other battery choices so that you can select the best one for your application. More choices:Click Me, (3) The 900MHz A/V receiver is not included, but we offer fully compatible models that work great with this special package. Please look here to purchase them:click here, The video format is available in NTSC or PAL. If you are unsure which to choose then please consult this list:TV Video Standards., ,
Ok, so you've decided that you need the EagleTree OSD ...DPCAV
DPC-420A OSD CAMERA / 420-LINE
| Pixels NTSC | 510x492, PAL |
| Instruction Manual | Click Me! |
Special Note: The DC power input is center positive. Reversing the voltage will damage the camera and void the warranty. If the provided A/V cable is replaced with a custom cable, then proper wiring order must be observed. Otherwise unrepairable electrical damage may result and the warranty will be void.,
The DPC-420A Digital OSD Camera is very compact and the ...DPCAV
DPC-540A OSD CAMERA / 540-LINE
| Instruction Manual | Click Me! |
Note: The DC power input is center positive. Reversing the voltage will damage the camera and void the warranty.,
The DPC-540A Digital OSD Camera is very compact and the ...